GFCI outlets
Ground fault outlets added or replaced in kitchens, baths, garages, lanais and outdoors, where the code calls for them.
Home/CITE Electric
Electrical contracting for Naples homes and businesses.
An unlimited electrical contractor license,
held by a master electrician on staff.
New construction wiring, remodel work, panels and circuits, backup power, energy monitoring, lighting systems and life safety, drawn and installed for homes and commercial buildings.
How electrical work supports every other system.
Pick a service. Solid layers are the work it installs. Hairline layers are the systems it powers. Every CITE Solutions system runs on this wiring.
Scenes
Preset lighting, shade and AV settings, such as Evening, Away, Morning and Film.
Control
Keypads, touch panels and the phone app used to run the system.
Devices
Fixtures, shades, speakers, displays, cameras, locks.
Network
Switches, access points and the cabling everything talks over.
Power
Circuits, panel and backup power that feed every other layer.
Installs this layer Powers this layer
Service, panels and circuits that run the whole load.
Access, lighting, climate, security and a full AV load on the same panels. We draw the panel schedule against the real fixture and device list rather than a rule of thumb, so circuits for every device are in place before trim-out.
Plan your project
Standby generators, battery storage and energy metering.
Standby generation, transfer and storage sized to the real load, and circuit level metering shown on the same keypads and app as everything else.
Plan your projectFire, egress and access, wired to code and certified.
Fire alarm and detection, emergency and egress lighting, and access control power, inspected, permitted and certified by a master electrician.
Plan your projectFunctional testing
Point to point and power on testing of every circuit against the panel schedule.
Compliance
Inspection, permit close out and certification under an unlimited license.
Documentation
Panel schedules, load calculations and as-builts handed over with the building.
Electrical services we design and install.
New construction wiring
Load calculation, panel schedule and rough-in drawn to the lighting plan, with low voltage brackets and a documented path back to the panel for every device on the drawing.
Remodel and renovation electrical
We survey the existing wiring, run new circuits through finished walls where we can and from the panel where we cannot, and phase the work so the building has power every evening.
Backup power and battery storage
A standby generator and automatic transfer switch sized to the real load calculation, with battery storage and a set order for which circuits in the building come back on first.
Energy management and monitoring
Circuit level metering on the panel, so the building reports what each circuit draws and backup power can be set against real numbers rather than guesswork.
Life safety, fire and access control
Fire alarm, smoke and CO detection, emergency and egress lighting, and the circuits that keep them live when the power goes. Wired, tested and handed over with certification.
Licensing and credentials
An unlimited electrical contractor license held by a master electrician, plus insurance, bonding and a permit history any builder can check before awarding the job.
Licensed, insured and inspected.
- CITE Electric LLC
- Certified Electrical Contractor EC13013828
- CITE Solutions LLC
- Certified Specialty Contractor, Limited Energy Systems
- License holder
- A master electrician on staff
- Insurance and bonding
- Certificates of insurance issued to the GC on request
- Permit history
- Permit and inspection history available on request
- Where it applies
- Statewide: a certified license is not limited to one county
Licensing and credentialsVerify with the State of Florida (opens in a new tab)
Service work from our own electrician.
CITE Electric keeps an electrician on staff for service calls in Naples homes and businesses, booked with us directly.
Fixture swaps
The old fixture taken down and the new one hung, wired and tested, inside and out.
Bulb replacements
Bulbs and lamps replaced across the house, inside and out.
General electrical work
Added outlets and circuits, repairs and the rest of the electrical list, from the team that wires new builds.
What we deliver for each client.
A builder needs a schedule and a documented path back to the panel. A homeowner needs a remodel that keeps the house powered while the work runs. We write the scope for the person reading it.
Builders and general contractors
One electrical subcontractor on one schedule, with rough-in drawings coordinated with the other trades before the walls close.
Developers
Repeatable panel schedules and rough-in standards across a run of houses, delivered on one schedule.
Architects
Early input on distribution, risers and service positions, before they become a problem to design around.
Homeowners
Remodel wiring done room by room, with the power back on at the end of every work day.
Businesses
Offices, clubs and hospitality under an unlimited license: conduit, cable tray, telecom rooms and life safety to commercial standard.
Existing CITE clients
Additions, panel upgrades and generator maintenance from the team that wired it in the first place.
CITE Electric wires the power.
CITE Solutions runs the systems.
CITE Electric and CITE Solutions are two companies, each with its own license, under the same ownership. The lighting plan, the panel schedule and the programming are drawn by one team and run on one schedule.